All sales are subject to a £40 admin fee that that consists of a full tank of fuel, can of chain lubricant, document wallet and key ring.
An All New Chassis
The new GSX-R1000R s chassis is more compact and narrower. Suzuki engineers designed a new twin-spar aluminium perimeter frame that s 20 mm narrower at the widest point between the spars and weighs 10% less. It s constructed of four sections, welded together. Two main spar sections are built up using inner castings and outer stampings to optimise torsional rigidity. The new bolt-on rear subframe is now made of square aluminium tubing, reducing weight by 38%. A new aluminium swingarm is braced on both sides instead of on one, to improve weight and rigidity balance. It s also 25 mm longer from the pivot shaft to the rear-most axle position, improving cornering feel on the racetrack. It s now easier for the rider to tuck in because the top of the fuel tank is 21 mm lower, and there s more room for a helmet chin bar when the rider is fully tucked in. The fuel tank is narrower and sleeker, making it easier for the rider to move from side to side and quickly change direction on a racetrack. The tank is also easier for the rider to grip with their knees while entering hard-braking corners on the racetrack, and the shape of the tank flows seamlessly into the seat and tail section.
Showa Balance Free Suspension
The GSX-R1000R is equipped with the latest Showa BFF (Balance Free Front) forks and BFRC lite (Balance Free Rear Cushion) lite shock, developed for racing and now adapted to mass production. Both improve cornering traction by delivering smoother, more controlled travel and better reaction to surface imperfections. The BFF system equalises oil pressure above and below the solid internal piston as it moves, pushing oil out of the fork leg or shock and through damping circuits that run to the other side of the piston, where it is drawn back into the fork leg or shock. The external compression and rebound damping circuits are more precise than valve stacks fitted above and below the piston in other types of forks and shock, and damping control is isolated from the influence of unequal pressure. It s a difference that can be felt on the racetrack, with riders reporting better feel and drive grip that allowed them to initiate their drive sooner and accelerate out of corners harder. As is the case with the standard model, the GSX-R1000R model s BFR lite shock works with a progressive linkage. The BFF forks and the BFR lite shock are fully adjustable.
New Brembo Discs and Calipers
New Brembo stainless steel brake discs are 10 mm larger in diameter, measuring 320 mm. Each disc features a new hybrid mounting system using a 50/50 combination of 5 conventional spring loaded floating pin mounts and 5 Brembo T-drive floating mounts. The Brembo T-drive floating mounts are lighter yet have more contact area between the disc and inner carrier, requiring fewer mounts (10) than conventional mounts alone (12), minimising the weight gain from the larger discs. But T-drive mounts can also produce an audible rattle in certain conditions. Conventional spring-loaded pin mounts are slightly heavier and produce a smaller contact area, but are quieter. Using a combination of T-drive and pin mounts reduces rattle as well as requiring fewer mounting points. The GSX-R1000 s Brembo radial-mount, monobloc front brake calipers each have four 32 mm pistons and work with a radial-pump, 19 mm master cylinder. The rear brake system uses a single-piston caliper and a 220 mm disc. The end of the front brake lever is slotted to reduce the chance that wind pressure will induce brake drag at high speed.
New Wheels and Tyres
New light weight, 6 spoke cast aluminium wheels contribute to nimble handling and sporty appearance. Bridgestone BATTLAX RACING STREET RS10 radial tyres have earned a good reputation worldwide for producing consistent performance and durability across a wide range of ambient conditions. The new GSX-R1000R comes with a 120/70ZR17M/C (58W) front tyre. A larger, 190/55ZR17M/C (75W) rear tyre replaces the existing model s 190/50ZR17M/C (73W) rear tyre and is designed to work with the increase in horsepower and torque.
Suzuki Drive Mode Selector (S-DMS)
Using the S-DMS switch on the left handlebar, the rider can select three different mapping and engine power delivery settings designed to match power delivery to various weather conditions or riding on different racetracks. The rider can change the power mode while riding, as long as the throttle is closed. Note, full power is available in all three modes. The S-DMS system works with the 10-level Motion Track TCS system, offering the rider a wide variety of power delivery and control choices.
The launch control system makes it easier for a racer to get a good start in competition by automatically limiting engine rpm and optimising torque delivery while the rider holds the throttle twist grip wide open and concentrates on feeding in the clutch lever. Once launch control is selected using a switch on the right handlebar, the system engages special maps controlling throttle valve opening and ignition timing. The system monitors throttle twist grip position, throttle valve position, engine rpm, gear position, front wheel speed, and rear wheel speed. At the moment of launch, the system is set to hold the engine at ideal rpm for an effective launch. Once the clutch lever is released and the clutch engaged, rpm is no longer limited but throttle opening is controlled to keep the engine at the ideal torque for strong acceleration. The launch control system not only helps the rider get a good initial launch, but also helps reduce the need to close the throttle twist grip prematurely. It does so by working with Motion Track TCS and controlling throttle valve opening and ignition timing while monitoring front and rear wheel speeds. The launch control system automatically disengages when the rider upshifts into third gear or closes the throttle twist grip.
Bi-Directional Quick Shift System
This system allows the rider to upshift and downshift without using the clutch or the throttle. The quick shift system allows the rider to upshift smoothly and quickly at full throttle, without closing the throttle. The system automatically interrupts power delivery just long enough (between 50 and 75 milliseconds, depending upon the sensitivity adjustment) to unload the transmission gear dogs and allow a clean upshift, producing smoother, almost uninterrupted acceleration. For quicker and smoother downshifts without manually blipping the throttle twist grip or using the clutch, the system automatically opens the throttle valves just enough to increase rpm and match engine speed to the next-lower gear ratio.
IMU Based Electronics
The new GSX-R1000R s advanced electronic management system incorporates feedback from a Continental Inertial Measurement Unit (IMU) which tracks the motion and position of the motorcycle in 6-directions, along 3-axis, Pitch, Roll and Yaw. Monitoring these motorcycle motions in real time allows traction, braking and cornering control to be more precise and effective. The GSX-R1000R s IMU-based systems are a product of advanced engineering, developed in MotoGP competition.
Motion Track TCS (Traction Control System)
Suzuki s advanced Motion Track TCS allows the rider to select 10 different levels of traction control intervention, depending upon road or racetrack conditions as well as personal preference and experience. The TCS intervention can be changed while riding, as long as the throttle is closed. The Motion Track TCS continuously monitors front and rear wheel speed, throttle position, crankshaft position, gear position, and motorcycle motion, and quickly reduces engine power output when a loss of traction is detected or predicted. Power output is controlled by managing ignition timing and throttle valve position. Motion Track TCS reads sensor input every 4-milliseconds, for precise response. And by using input from the IMU (Inertial Measurement Unit), the ECM can calculate the motorcycle s motion in 6-directions (along 3-axis, Pitch, Roll and Yaw), for more precise traction control.
Motion Track Brake System
The GSX-R1000R is equipped with a new Motion Track Brake System, which works with the IMU (Inertial Measurement Unit). The IMU constantly monitors vehicle movement in 6-directions along 3-axes, Pitch, Roll and Yaw. Using IMU input, the Motion Track Brake System reduces rear wheel lift during very hard braking* on the racetrack, and is especially effective on downhill sections of track. On the GSX-R1000R the system also optimises brake pressure when the motorcycle is leaning too.
*ABS is not designed to shorten the braking distance. Please always ride at a safe speed for road and weather conditions, including while cornering.